109d www.vishay.com vishay revision: 11-jul-13 1 document number: 40023 for technical questions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 wet tantalum capacitors sintered anode t antalex ? capacitors for operation to + 125 c, elastomer-sealed features ? axial through-hole terminations: standard tin/lead (snpb), 100 % tin (rohs compliant) available ? vishay sprague model 109d tubular elastomer-sealed, sintered anode t antalex ? capacitors fill the basic requirements for applications where a superior quality, reliable design for industrial, automotive and telecommunications application is desired. ? model 109d capacitors are the commercial equivalents of tansitor style wc, uwc, mallory-nacc style tls, tlh and the military style cl64 and cl65, designed to meet the performance requ irements of military specification mil-dtl-3965. ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 note ? * this datasheet provides information about parts that are ? rohs-compliant and/or parts th at are non-rohs-compliant. for ? example, parts with lead (pb) te rminations are not rohs-compliant. ? please see the information/tables in this datasheet for details. performance characteristics operating temperature: - 55 c to + 85 c ? (to + 125 c with voltage derating) capacitance tolerance: at 120 hz, + 25 c. ? 20 % standard. 10 %, 5 % available as special. dc leakage current (dcl max.): ? at + 25 c, + 85 c, + 125 c: leakage current shall not exceed the values listed in the standard ratings tables. life test: capacitors are capable of withstanding a 2000 h life test at a temperature of + 85 c or + 125 c at the applicable dc working voltage. following the life test: 1. dcl shall not exceed the initial requirements or 1 a, whichever is greater. 2. the esr shall meet the initial requirement. 3. change in capacitance shall not exceed 10 % from the initial measurement. for capacitors with voltage ratings of 15 v dc and below, change in capacitance shall not exceed + 10 %, - 25 % from the initial measurement. note ? packaging: the use of formed plastic trays for packaging these ax ial lead components is standard. tape and reel is not availab le due to the unit weight. available available ordering information 109d 207 x0 006 c 0 e3 model capacitance capacitance tolerance dc voltage rating at + 85 c case code style number rohs compliant this is expressed in picofarads. the first two di gits are the significant figures. the third is the number of zeros to follow x0 = 20 % x9 = 10 % x5 = 5 % special order this is expressed in volts. to complete the three-digit block, zeros precede the voltage rating. a decimal point is indicated by an r (6r3 = 6.3 v) see ratings and case codes table 0 = no outer sleeve standard 2 = outer plastic film insulation e3 = 100 % tin termination (rohs compliant) blank = snpb termination (standard design)
109d www.vishay.com vishay revision: 11-jul-13 2 document number: 40023 for technical questions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) replaces previous w case dimensions in inches [millimeters] case code bare tube with plastic-film insulating sleeve lead length d l d max. l max. c 0.188 0.016 [4.78 0.41] 0.453 + 0.031/- 0.016 [11.51 + 0.79/- 0.41] 0.219 [5.56] 0.608 [15.45] 1.500 0.250 [38.10 6.3 5] f 0.281 0.016 [7.14 0.41] 0.641 + 0.031/- 0.016 [16.28 + 0.79/- 0.41] 0.312 [7.92] 0.796 [20.22] 2.250 0.250 [57.15 6.3 5] t 0.375 0.016 [9.53 0.41] 0.766 + 0.031/- 0.016 [19.46 + 0.79/- 0.41] 0.406 [10.31] 0.921 [23.40] 2.250 0.250 [57.15 6. 35] k (1) 0.375 0.016 [9.53 0.41] 1.062 + 0.031/- 0.016 [26.97 + 0.79/- 0.41] 0.406 [10.31] 1.217 [30.91] 2.250 0.250 [57.15 6.35 ] ratings and case codes (standard) f 6 v 8 v 10 v 15 v 20 v 25 v 30 v 35 v 50 v 60 v 75 v 100 v 125 v 1.7 c 2.5 c 3.0 c 3.5 c 3.6 c 4.0 c 4.5 c 4.7 c 5.0 c 6.8 c 7.0 c 8.0 c 8.2 c 9.0 f 10 c c f 11 f 13 f 14 f 15 c c f 18 t 20 c f 22 c c f f 25 c f t 27 c c 30 c t 33 c f 39 f 40 f t 43 t 47 c f 50 f t 56 c t k 0.025 [6.35] dia. (no. 22 awg) tinned solderable leads d 0.250 [6.35] max. + - l
109d www.vishay.com vishay revision: 11-jul-13 3 document number: 40023 for technical questions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 60 t 68 c f f t 70 f 82 t 86 k 100 f f/t t 110 k 120 f t 140 f k 150 t 160 k 170 t 180 f t 220 f t 250 t 270 f t k 290 t t 300 k 330 t 350 k 390 t 430 t 540 k 560 t 750 k 850 k 1200 k ratings and case codes (extended) f 6 v 8 v 10 v 15 v 20 v 25 v 30 v 35 v 50 v 60 v 75 v 100 v 125 v 6.8 c 8.2 c 10 c 12 c 15 c 18 c 22 c c 27 c f 33 c c f 39 c f t 47 c c c f t 56 c c f t k 68 c c f t 82 c c f f k 86 k 100 c c f 110 t 120 c f f k 140 c t 150 c f ratings and case codes (standard) f 6 v 8 v 10 v 15 v 20 v 25 v 30 v 35 v 50 v 60 v 75 v 100 v 125 v
109d www.vishay.com vishay revision: 11-jul-13 4 document number: 40023 for technical questions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 160 t 180 c f f t 220 f f t t k 270 f f t k k 330 f f t k 350 t 390 f f t t 470 f f t k 510 t 540 t 560 f t k 680 f k 750 k 820 f t/k 1000 t k 1200 t/k 1500 t k 1800 k 2200 k standard ratings capacitance (f) case code part number (1) max. esr at + 25 c 120 hz ( ? ) max. imp. at - 55 c 120 hz ( ? ) max. dcl (a) at max. capacitance change (%) at max. rms ripple current 120 hz (ma) + 25 c + 85 c + 125 c - 55 c + 85 c + 125 c 6 v dc at + 85 c; 7 v dc at + 125 c 30 c 109d306x0006c0 4.2 100 1.0 2.0 - 40 + 10.5 + 12 140 68 c 109d686x0006c0 4.0 60 1.0 2.0 - 40 + 14 + 16 160 140 f 109d147x0006f0 2.0 40 1.0 3.0 - 40 + 14 + 16 330 270 f 109d277x0006f0 4.0 25 1.0 7.0 - 44 + 17.5 + 20 270 290 t 109d297x0006t0 2.0 24 2.0 7.0 - 70 + 20 + 20 410 330 t 109d337x0006t0 2.1 20 2.0 7.9 - 44 + 14 + 16 410 560 t 109d567x0006t0 3.0 25 2.0 13 - 64 + 17.5 + 20 340 1200 k 109d128x0006k0 1.6 20 3.0 14 - 80 + 25 + 25 530 8 v dc at + 85 c; 5 v dc at + 125 c 22 c 109d226x0008c0 6.0 115 1.0 2.0 - 40 + 10.5 + 12 130 25 c 109d256x0008c0 4.2 100 1.0 2.0 - 40 + 10.5 + 12 140 56 c 109d566x0008c0 4.0 59 1.0 2.0 - 40 + 14 + 16 160 220 f 109d227x0008f0 4.0 30 1.0 7.0 - 44 + 17.5 + 20 270 290 t 109d297x0008t0 2.0 24 2.0 9.5 - 70 + 20 + 20 410 430 t 109d437x0008t0 3.2 25 2.0 14 - 64 + 17.5 + 20 410 850 k 109d857x0008k0 1.0 22 4.0 16 - 80 + 25 + 25 670 10 v dc at + 85 c; 7 v dc at + 125 c 20 c 109d206x0010c0 5.0 175 1.0 2.0 - 32 + 10.5 + 12 140 47 c 109d476x0010c0 5.0 100 1.0 2.0 - 36 + 14 + 16 160 100 f 109d107x0010f0 2.1 60 1.0 4.0 - 36 + 14 + 16 270 180 f 109d187x0010f0 4.0 40 1.0 7.0 - 36 + 14 + 16 270 250 t 109d257x0010t0 2.0 30 2.0 10 - 40 + 14 + 16 410 390 t 109d397x0010t0 3.0 25 2.0 16 - 64 + 17.5 + 20 340 750 k 109d757x0010t0 1.0 23 4.0 16 - 80 + 25 + 25 670 note (1) part numbers shown are for units with 20 % capacitance tolerance and uninsulated capacitors. for 10 % units, change the dig it following the letter x from 0 to 9. fo r units with outer plastic-fi lm insulation, substitute 2 for 0 at the end of th e part number. for rohs compliant add e3. ratings and case codes (extended) f 6 v 8 v 10 v 15 v 20 v 25 v 30 v 35 v 50 v 60 v 75 v 100 v 125 v
109d www.vishay.com vishay revision: 11-jul-13 5 document number: 40023 for technical questions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 15 v dc at + 85 c; 10 v dc at + 125 c 15 c 109d156x0015c0 6.0 155 1.0 2.0 - 24 + 10.5 + 12 130 33 c 109d336x0015c0 5.0 90 1.0 2.0 - 28 + 14 + 16 160 70 f 109d706x0015f0 3.6 75 1.0 4.0 - 28 + 14 + 16 270 120 f 109d127x0015f0 4.0 50 1.0 7.0 - 28 + 17.5 + 20 270 270 t 109d277x0015t0 3.0 30 2.0 16 - 56 + 17.5 + 20 340 540 k 109d547x0015k0 1.2 23 6.0 24 - 80 + 25 + 25 610 20 v dc at + 85 c; 13 v dc at + 125 c 27 c 109d276x0020c0 5.0 100 1.0 2.0 - 20 + 11 + 14 160 220 t 109d227x0020t0 4.0 3 2.0 16 - 48 + 13 + 15 410 25 v dc at + 85 c; 15 v dc at + 125 c 10 c 109d106x0025c0 6.0 220 1.0 2.0 - 16 + 8 + 9 130 22 c 109d226x0025c0 5.0 140 1.0 3.0 - 20 + 10.5 + 12 160 50 f 109d506x0025f0 4.0 70 1.0 5.0 - 28 + 13 + 15 270 100 f 109d107x0025f0 4.0 50 1.0 10 - 28 + 13 + 15 270 100 t 109d107x0025t0 4.0 45 2.0 10 - 48 + 13 + 15 410 180 t 109d187x0025t0 4.0 32 2.0 18 - 48 + 13 + 15 340 350 k 109d357x0025k0 1.3 24 7.0 28 - 70 + 25 + 25 580 30 v dc at + 85 c; 20 v dc at + 125 c 7.0 c 109d705x0030c0 8.0 275 1.0 2.0 - 16 + 8 + 12 110 8.0 c 109d805x0030c0 7.5 275 1.0 2.0 - 16 + 8 + 12 130 15 c 109d156x0030c0 8.0 175 1.0 2.0 - 20 + 10.5 + 12 160 40 f 109d406x0030f0 4.0 65 1.0 5.0 - 24 + 10.5 + 12 270 68 f 109d686x0030f0 6.0 60 1.0 8.0 - 24 + 13 + 15 270 100 t 109d107x0030t0 6.0 40 2.0 12 - 28 + 10.5 + 12 410 150 t 109d157x0030t0 4.1 35 2.0 18 - 48 + 13 + 15 340 300 k 109d307x0030k0 1.6 25 8.0 32 - 60 + 25 + 25 550 35 v dc at + 85 c; 22 v dc at + 125 c 68 f 109d686x0035f0 6.0 60 1.0 8 - 24 + 12 + 15 270 120 t 109d127x0035t0 4.0 38 2.0 16 - 30 + 13 + 15 410 270 k 109d277x0035k0 2.2 23 8.0 32 - 45 + 20 + 25 500 50 v dc at + 85 c; 30 v dc at + 125 c 4.5 c 109d455x0050c0 9.0 400 1.0 2.0 - 16 + 5 + 6 110 5.0 c 109d505x0050c0 9.0 400 1.0 2.0 - 16 + 5 + 6 130 10 c 109d106x0050c0 8.0 250 1.0 2.0 - 24 + 8 + 9 160 22 f 109d226x0050f0 7.0 95 1.0 4.0 - 20 + 10.5 + 12 230 25 f 109d256x0050f0 6.0 95 1.0 5.0 - 20 + 10.5 + 12 270 47 f 109d476x0050f0 6.0 70 1.0 9.0 - 28 + 13 + 15 270 60 t 109d606x0050t0 3.0 45 2.0 12 - 16 + 10.5 + 12 410 82 t 109d826x0050t0 4.0 45 2.0 16 - 32 + 13 + 15 340 160 k 109d167x0050k0 2.2 27 8.0 32 - 50 + 25 + 25 460 standard ratings capacitance (f) case code part number (1) max. esr at + 25 c 120 hz ( ? ) max. imp. at - 55 c 120 hz ( ? ) max. dcl (a) at max. capacitance change (%) at max. rms ripple current 120 hz (ma) + 25 c + 85 c + 125 c - 55 c + 85 c + 125 c note (1) part numbers shown are for units with 20 % capacitance tolerance and uninsulated capacitors. for 10 % units, change the dig it following the letter x from 0 to 9. fo r units with outer plastic-fi lm insulation, substitute 2 for 0 at the end of th e part number. for rohs compliant add e3.
109d www.vishay.com vishay revision: 11-jul-13 6 document number: 40023 for technical questions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 60 v dc at + 85 c; 40 v dc at + 125 c 4.0 c 109d405x0060c0 10.0 550 1.0 2.0 - 16 + 5 + 6 110 8.2 c 109d825x0060c0 8.0 275 1.0 2.0 - 24 + 8 + 9 140 20 f 109d206x0060f0 5.0 105 1.0 5.0 - 16 + 10.5 + 12 270 39 f 109d396x0060f0 7.0 90 1.0 9.0 - 28 + 10.5 + 12 230 50 t 109d506x0060t0 4.0 50 2.0 12 - 16 + 10.5 + 12 410 68 t 109d686x0060t0 6.0 50 2.0 16 - 32 + 10.5 + 12 340 140 k 109d147x0060k0 2.4 28 8.0 32 - 40 + 20 + 20 430 75 v dc at + 85 c; 50 v dc at + 125 c 3.5 c 109d355x0075c0 10.0 650 1.0 2.0 - 16 + 5 + 6 110 6.8 c 109d685x0075c0 8.0 300 1.0 2.0 - 20 + 8 + 9 140 13 f 109d136x0075f0 6.0 160 1.0 4.0 - 16 + 8 + 9 190 15 f 109d156x0075f0 6.5 150 1.0 5.0 - 16 + 8 + 9 270 33 f 109d336x0075f0 7.0 90 1.0 10 - 24 + 10.5 + 15 230 40 t 109d406x0075t0 5.0 60 2.0 12 - 16 + 10.5 + 12 410 56 t 109d566x0075t0 6.0 60 2.0 17 - 28 + 10.5 + 15 300 110 k 109d117x0075k0 3.1 29 9.0 36 - 35 + 20 + 20 400 100 v dc at + 85 c; 65 v dc at + 125 c 2.5 c 109d255x0100c0 26.5 950 1.0 2.0 - 16 + 7 + 8 100 3.0 c 109d305x0100c0 10.0 800 1.0 2.0 - 16 + 7 + 8 110 4.7 c 109d475x0100c0 10.0 500 1.0 2.0 - 16 + 7 + 8 130 10 f 109d106x0100f0 6.0 215 1.0 4.0 - 16 + 7 + 8 190 11 f 109d116x0100f0 6.0 200 1.0 4.0 - 16 + 7 + 8 230 22 f 109d226x0100f0 7.0 100 1.0 9.0 - 16 + 7 + 8 230 30 t 109d306x0100t0 4.0 80 2.0 12 - 16 + 7 + 8 340 43 t 109d436x0100t0 6.0 70 2.0 17 - 20 + 7 + 8 300 86 k 109d866x0100k0 3.1 30 9.0 36 - 25 + 15 + 15 400 125 v dc at + 85 c; 85 v dc at + 125 c 1.7 c 109d175x0125c0 54.6 1250 1.0 2.0 - 16 + 7 + 8 100 3.6 c 109d365x0125c0 15.0 600 1.0 2.0 - 16 + 7 + 8 110 9.0 f 109d905x0125f0 15.0 240 1.0 5.0 - 16 + 7 + 8 210 14 f 109d146x0125f0 12.0 167 1.0 7.0 - 16 + 7 + 8 190 18 t 109d186x0125t0 11.0 129 2.0 9.0 - 16 + 7 + 8 340 25 t 109d256x0125t0 10.0 93 2.0 13 - 16 + 7 + 8 260 56 k 109d566x0125k0 4.1 3.2 10 40 - 25 + 15 + 15 400 standard ratings capacitance (f) case code part number (1) max. esr at + 25 c 120 hz ( ? ) max. imp. at - 55 c 120 hz ( ? ) max. dcl (a) at max. capacitance change (%) at max. rms ripple current 120 hz (ma) + 25 c + 85 c + 125 c - 55 c + 85 c + 125 c note (1) part numbers shown are for units with 20 % capacitance tolerance and uninsulated capacitors. for 10 % units, change the dig it following the letter x from 0 to 9. fo r units with outer plastic-fi lm insulation, substitute 2 for 0 at the end of th e part number. for rohs compliant add e3.
109d www.vishay.com vishay revision: 11-jul-13 7 document number: 40023 for technical questions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 extended ratings capacitance (f) case code part number (1) max. esr at + 25 c 120 hz ( ? ) max. imp. at - 55 c 120 hz ( ? ) max. dcl (a) at max. capacitance change (%) at max. rms ripple current 120 hz (ma) + 25 c + 85 c + 125 c - 55 c + 85 c + 125 c 6 v dc at + 85 c; 7 v dc at + 125 c 140 c 109d147x0006c2 3.0 54 2.0 9.0 - 45 + 13 + 16 160 820 f 109d827x0006f0 2.5 18 3.0 14 - 88 + 16 + 20 300 1500 t 109d158x0006t0 1.5 18 5.0 20 - 90 + 20 + 25 480 2200 k 109d228x0006k0 1.0 13 6.0 24 - 90 + 25 + 30 670 8 v dc at + 85 c; 5 v dc at + 125 c 180 c 109d187x0008c0 3.0 45 2.0 9.0 - 60 + 13 + 16 180 470 f 109d477x0008f0 2.5 25 3.0 14 - 75 + 16 + 20 300 680 f 109d687x0008f0 2.5 22 3.0 14 - 90 + 16 + 20 300 1800 k 109d188x0008k0 1.0 14 7.0 25 - 60 + 20 + 30 670 10 v dc at + 85 c; 7 v dc at + 125 c 100 c 109d107x0010c0 3.0 60 2.0 9.0 - 50 + 13 + 16 160 120 c 109d127x0010c0 4.0 60 2.0 9.0 - 45 + 13 + 16 160 150 c 109d477x0010f0 3.0 54 2.0 9.0 - 55 + 13 + 16 180 390 f 109d397x0010f0 2.5 30 3.0 16 - 70 + 16 + 20 300 470 f 109d477x0010f0 2.5 30 3.0 16 - 65 + 16 + 20 300 560 f 109d567x0010f0 2.5 27 3.0 16 - 77 + 16 + 20 300 1000 t 109d108x0010t0 1.5 20 5.0 20 - 75 + 20 + 25 480 1200 k 109d128x0010k0 1.0 18 7.0 25 - 75 + 30 + 30 670 1200 t 109d128x0010t0 1.5 18 5.0 20 - 88 + 20 + 25 480 1500 k 109d158x0010k0 1.0 15 7.0 25 - 88 + 25 + 30 670 15 v dc at + 85 c; 10 v dc at + 125 c 68 c 109d686x0015c0 4.0 80 2.0 9.0 - 40 + 13 + 16 140 82 c 109d826x0015c0 4.0 80 2.0 9.0 - 38 + 13 + 16 160 100 c 109d107x0015c0 4.0 72 2.0 9.0 - 44 + 13 + 16 160 270 f 109d277x0015f0 2.5 35 3.0 16 - 60 + 16 + 20 300 330 f 109d337x0015f0 2.5 35 3.0 16 - 60 + 16 + 20 300 390 f 109d397x0015f0 2.5 31 3.0 16 - 66 + 16 + 20 300 510 t 109d517x0015t0 1.8 25 6.0 24 - 65 + 20 + 25 340 540 t 109d547x0015t0 1.8 22 6.0 24 - 77 + 20 + 25 440 820 t 109d827x0015t0 1.8 22 6.0 24 - 77 + 20 + 25 440 820 k 109d827x0015k0 1.2 20 8.0 32 - 70 + 30 + 30 610 1000 k 109d108x0015k0 1.2 17 8.0 32 - 77 + 25 + 30 610 20 v dc at + 85 c; 13 v dc at + 125 c 56 c 109d566x0020c0 4.3 90 2.0 9.0 - 38 + 13 + 16 140 82 c 109d826x0020c0 4.3 81 2.0 9.0 - 43 + 13 + 16 160 220 f 109d227x0020f0 2.7 35 3.0 16 - 60 + 16 + 20 300 330 f 109d337x0020f0 2.7 31 3.0 16 - 66 + 16 + 20 300 25 v dc at + 85 c; 15 v dc at + 125 c 47 c 109d476x0025c0 4.3 100 2.0 9.0 - 35 + 12 + 15 140 68 c 109d686x0025c0 4.3 90 2.0 9.0 - 40 + 12 + 15 160 180 f 109d187x0025f0 2.7 37 3.0 16 - 55 + 13 + 16 300 270 f 109d277x0025f0 2.7 33 3.0 16 - 62 + 13 + 16 300 350 t 109d357x0025t0 1.8 27 7.0 28 - 60 + 20 + 25 440 560 t 109d567x0025t0 1.8 24 7.0 28 - 72 + 20 + 25 440 680 k 109d687x0025k0 1.2 19 8.0 32 - 72 + 25 + 30 610 750 k 109d757x0025k2 1.0 18 8.0 29 - 60 + 25 + 25 610 note (1) part numbers shown are for units with 20 % capacitance tolerance and uninsulated capacitors. for 10 % units, change the dig it following the letter x from 0 to 9. fo r units with outer plastic-fi lm insulation, substitute 2 for 0 at the end of th e part number. for rohs compliant add e3.
109d www.vishay.com vishay revision: 11-jul-13 8 document number: 40023 for technical questions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 30 v dc at + 85 c; 20 v dc at + 125 c 39 c 109d396x0030c0 5.2 110 2.0 9.0 - 28 + 10 + 12 140 47 c 109d476x0030c0 5.2 100 2.0 9.0 - 30 + 10 + 12 140 56 c 109d566x0030c0 5.2 100 2.0 9.0 - 38 + 12 + 15 140 150 f 109d157x0030f0 2.5 40 3.0 9.0 - 40 + 12 + 15 300 180 f 109d187x0030f0 2.5 40 3.0 16 - 45 + 13 + 16 300 220 f 109d227x0030f0 2.5 36 3.0 16 - 60 + 13 + 16 300 330 t 109d337x0030t0 1.8 28 8.0 16 - 45 + 20 + 25 440 390 t 109d397x0030t0 1.8 28 8.0 32 - 50 + 20 + 25 440 470 t 109d477x0030t0 1.8 25 8.0 32 - 65 + 20 + 25 550 560 k 109d567x0030k0 1.3 20 9.0 32 - 65 + 25 + 30 590 35 v dc at + 85 c; 22 v dc at + 125 c 33 c 109d336x0035c0 5.2 130 2.0 9.0 - 30 + 10 + 12 140 47 c 109d476x0035c0 5.2 115 2.0 9.0 - 35 + 10 + 12 140 120 f 109d127x0035f0 2.5 45 3.0 16 - 45 + 13 + 16 300 220 t 109d227x0035t0 1.8 30 8.0 32 - 45 + 20 + 25 440 390 t 109d337x0035t0 1.8 27 8.0 32 - 58 + 20 + 25 440 470 k 109d477x0035t0 1.3 21 9.0 36 - 58 + 25 + 30 590 50 v dc at + 85 c; 30 v dc at + 125 c 22 c 109d226x0050c0 5.0 150 2.0 9.0 - 24 + 10 + 12 140 33 c 109d336x0050c0 5.0 135 2.0 9.0 - 29 + 10 + 12 140 82 f 109d826x0050f0 2.5 55 4.0 24 - 35 + 10 + 15 300 120 f 109d127x0050f0 2.5 49 4.0 24 - 42 + 12 + 15 300 160 t 109d167x0050t0 1.8 32 6.0 32 - 35 + 20 + 25 420 270 t 109d277x0050t0 1.8 29 8.0 32 - 46 + 20 + 25 440 330 k 109d337x0050k0 1.5 22 9.0 36 - 46 + 25 + 30 550 60 v dc at + 85 c; 40 v dc at + 125 c 18 c 109d186x0060c0 5.0 160 3.0 12 - 20 + 10 + 12 140 27 c 109d276x0060c0 5.0 144 3.0 12 - 24 + 10 + 12 140 68 f 109d686x0060f0 3.0 60 3.0 20 - 30 + 12 + 15 270 100 f 109d107x0060f0 2.5 54 4.0 20 - 36 + 12 + 15 300 140 t 109d147x0060t0 2.0 32 8.0 32 - 30 + 16 + 20 420 220 t 109d227x0060t0 1.8 29 8.0 32 - 40 + 16 + 20 440 270 k 109d277x0060k0 1.5 23 9.0 36 - 45 + 20 + 25 550 75 v dc at + 85 c; 50 v dc at + 125 c 12 c 109d126x0075c0 5.0 175 2.0 12 - 12 + 8 + 10 140 15 c 109d156x0075c0 5.0 160 2.0 12 - 14 + 10 + 12 140 22 c 109d226x0075c0 5.0 157 3.0 12 - 19 + 10 + 12 140 47 f 109d476x0075f0 3.0 75 4.0 24 - 18 + 10 + 12 270 56 f 109d566x0075f0 3.0 70 4.0 24 - 20 + 12 + 15 270 82 f 109d826x0075f0 2.5 63 4.0 24 - 30 + 12 + 15 300 110 t 109d117x0075t0 2.0 33 9.0 36 - 25 + 16 + 20 420 180 t 109d187x0075t0 1.8 30 9.0 36 - 35 + 16 + 20 440 220 k 109d227x0075k0 2.2 24 10 40 - 40 + 20 + 25 450 270 k 109d277x0075k2 1.3 24 10 40 - 40 + 20 + 25 450 extended ratings capacitance (f) case code part number (1) max. esr at + 25 c 120 hz ( ? ) max. imp. at - 55 c 120 hz ( ? ) max. dcl (a) at max. capacitance change (%) at max. rms ripple current 120 hz (ma) + 25 c + 85 c + 125 c - 55 c + 85 c + 125 c note (1) part numbers shown are for units with 20 % capacitance tolerance and uninsulated capacitors. for 10 % units, change the dig it following the letter x from 0 to 9. fo r units with outer plastic-fi lm insulation, substitute 2 for 0 at the end of th e part number. for rohs compliant add e3.
109d www.vishay.com vishay revision: 11-jul-13 9 document number: 40023 for technical questions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 100 v dc at + 85 c; 65 v dc at + 125 c 8.2 c 109d825x0100c0 6.0 250 3.0 12 - 12 + 12 + 12 130 10 c 109d106x0100c0 6.0 200 3.0 12 - 17 + 10 + 12 130 33 f 109d336x0100f0 3.5 85 4.0 24 - 18 + 15 + 15 250 39 f 109d396x0100f0 3.5 80 5.0 24 - 20 + 12 + 15 250 56 t 109d566x0100t0 2.2 45 9.0 36 - 20 + 15 + 15 400 68 t 109d686x0100t0 2.2 40 10 40 - 30 + 14 + 16 400 86 k 109d866x0100k0 3.2 30 10 40 - 25 + 15 + 15 370 120 k 109d127x0100f0 2.8 30 12 48 - 35 + 15 + 17 440 125 v dc at + 85 c; 85 v dc at + 125 c 6.8 c 109d685x0125c0 11.7 300 3.0 12 - 14 + 10 + 12 130 27 f 109d276x0125f0 3.5 90 5.0 24 - 18 + 12 + 15 250 39 t 109d396x0125t0 2.2 60 10 40 - 16 + 14 + 16 400 47 t 109d476x0125t0 2.2 50 10 40 - 26 + 14 + 16 400 56 k 109d566x0125k0 4.1 32 10 40 - 25 + 15 + 15 330 82 k 109d826x0125k0 2.8 32 12 48 - 30 + 15 + 17 440 extended ratings capacitance (f) case code part number (1) max. esr at + 25 c 120 hz ( ? ) max. imp. at - 55 c 120 hz ( ? ) max. dcl (a) at max. capacitance change (%) at max. rms ripple current 120 hz (ma) + 25 c + 85 c + 125 c - 55 c + 85 c + 125 c note (1) part numbers shown are for units with 20 % capacitance tolerance and uninsulated capacitors. for 10 % units, change the dig it following the letter x from 0 to 9. fo r units with outer plastic-fi lm insulation, substitute 2 for 0 at the end of th e part number. for rohs compliant add e3.
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
